3” Adams Round Decals If your anything like us here at Adam’s Polishes UK you will be a little obsessed with Adam’s Polishes. What better way to finish of your detail than with a fresh film finish Gloss Adam’s Polishes decal. Whether your car is a show car, garage queen or your daily driver our high quality Vinyl decals look fantastic on your glass.
- Size - 2.95” x 2.95”
- Colours - White, Black, Red, Orange, Blue
- Avery Dennison 700 Premium Film
- Application Temperature +10°C minimum
- Film Type Polymeric Calendered
- Can Be Applied to Flat Surfaces and Simple Curves
- Adhesive Type Acrylic Based
- Adhesive Colour Clear
- Film Finish Gloss
Instructions
Step 1 - Clean the area thoroughly with rubbing alcohol or soap and water, its best to remove any protection from the area to help aid the adhesion of the decal.
Step 2 - Prepare the decal for application by rubbing a squeegee or credit card across the clear transfer tape. This will ensure the decal will be picked up by the application tape.
Step 3 - Peel the backing paper from the decal. This is an important part as it means less lift on the decal and makes sure it stays in place on the application tape.
If the decal doesn't release from the backing paper fold it back down, apply pressure and try again.
Step 4 - Placing the sticker on the car, slowly lower the sticker onto the clean dry surface and rub it in place firmly with a squeegee or credit card. Its good practice to start from the centre and rub out to the edges to help remove air bubbles.
Step 5 - With the decal in place, you can now peel away the clear application tape. Its best to pull the clear tape back on itself when removing to help alleviate lifting of the decal.
With the sticker in place, leave it for at least 24 hours before washing the area. This will help insure a good bond. Ideally pick a warm day to apply your decals.
