Adam’s Salt, Mud & Grime Remover is designed to do a deep-clean wash of a vehicle, using a more heavy-duty wash formula to help loosen and lift salt, dirt, road grime, oils, mud, and more, to then wipe away these contaminants with less effort. This results in a safer wash with less chance of scratching, since you won’t have to use as much heavy scrubbing to remove the grime. Salt, Mud & Grime Remover is a great option to use every few washes when you need that extra strength to bring back a nice, clean finish to a very dirty vehicle.
Made in the USA
Aids In the Removal of Salt, Grime, Mud, and Dirt
Acidic Formula Helps Dissolve and Remove Contamination
Contains Corrosion Inhibitors
Safe on Ceramic Coated Vehicles
Powerful Degreasing Properties
16oz Size
Instructions: For best results, use a Foam Cannon or Foam Gun to pre-soak your vehicle.
Prep two buckets with Grit Guards: (1) Wash bucket with 2oz of Adam’s Salt, Mud & Grime Remover and Wash Pad and (2) Rinsing bucket filled with clean water.
Fill Adam's Foam Cannon or Foam Gun canister approximately ⅘ full with water.
Pour 1-2 oz. of Salt, Mud & Grime Remover Shampoo into the canister.
Screw Foam Cannon or Foam Gun barrel onto canister, shake well. Turn the top knob all the way clockwise for maximum level of foam. For maximum suds when using a Foam Gun, we recommend NOT using a metering tip.
Pre-rinse vehicle with pressure washer or garden hose to remove heavy dirt, mud, and other debris from the surface.
Attach Adam’s Foam Cannon canister and sprayer to the pressure washer wand. For use with a foam gun, attach to a hose nozzle.
Squeeze the pressure washer handle or Foam Gun nozzle to spray a clinging foam solution onto the vehicle.
Allow Salt, Mud & Grime Remover to pre-soak the vehicle, helping to loosen and lift dirt for a few minutes as it drips down the vehicle surfaces. Perform a Two-Bucket Wash, then disconnect the Foam Cannon or Foam Gun, and finally rinse and dry the vehicle following our instructional videos.
Adam’s Salt, Mud & Grime Remover is designed to do a deep-clean wash of a vehicle, using a more heavy-duty wash formula to help loosen and lift salt, dirt, road grime, oils, mud, and more, to then wipe away these contaminants with less effort. This results in a safer wash with less chance of scratching, since you won’t have to use as much heavy scrubbing to remove the grime. Salt, Mud & Grime Remover is a great option to use every few washes when you need that extra strength to bring back a nice, clean finish to a very dirty vehicle.
Made in the USA
Aids In the Removal of Salt, Grime, Mud, and Dirt
Acidic Formula Helps Dissolve and Remove Contamination
Contains Corrosion Inhibitors
Safe on Ceramic Coated Vehicles
Powerful Degreasing Properties
16oz Size
Instructions: For best results, use a Foam Cannon or Foam Gun to pre-soak your vehicle.
Prep two buckets with Grit Guards: (1) Wash bucket with 2oz of Adam’s Salt, Mud & Grime Remover and Wash Pad and (2) Rinsing bucket filled with clean water.
Fill Adam's Foam Cannon or Foam Gun canister approximately ⅘ full with water.
Pour 1-2 oz. of Salt, Mud & Grime Remover Shampoo into the canister.
Screw Foam Cannon or Foam Gun barrel onto canister, shake well. Turn the top knob all the way clockwise for maximum level of foam. For maximum suds when using a Foam Gun, we recommend NOT using a metering tip.
Pre-rinse vehicle with pressure washer or garden hose to remove heavy dirt, mud, and other debris from the surface.
Attach Adam’s Foam Cannon canister and sprayer to the pressure washer wand. For use with a foam gun, attach to a hose nozzle.
Squeeze the pressure washer handle or Foam Gun nozzle to spray a clinging foam solution onto the vehicle.
Allow Salt, Mud & Grime Remover to pre-soak the vehicle, helping to loosen and lift dirt for a few minutes as it drips down the vehicle surfaces. Perform a Two-Bucket Wash, then disconnect the Foam Cannon or Foam Gun, and finally rinse and dry the vehicle following our instructional videos.
